Current

SCPI Commands :

READ:NIOT:MEASurement<Instance>:MEValuation:PDYNamics:CURRent
FETCh:NIOT:MEASurement<Instance>:MEValuation:PDYNamics:CURRent
CALCulate:NIOT:MEASurement<Instance>:MEValuation:PDYNamics:CURRent
class CurrentCls[source]

Current commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for power dynamics measurements exceeding the specified power dynamics limits.

  • Off_Power_Before: float or bool: No parameter help available

  • On_Power_Rms: float or bool: No parameter help available

  • On_Power_Peak: float or bool: No parameter help available

  • Off_Power_After: float or bool: No parameter help available

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for power dynamics measurements exceeding the specified power dynamics limits.

  • Off_Power_Before: float: No parameter help available

  • On_Power_Rms: float: No parameter help available

  • On_Power_Peak: float: No parameter help available

  • Off_Power_After: float: No parameter help available

calculate() → CalculateStruct[source]
# SCPI: CALCulate:NIOT:MEASurement<Instance>:MEValuation:PDYNamics:CURRent
value: CalculateStruct = driver.niotMeas.multiEval.pdynamics.current.calculate()

Return the current, average, minimum, maximum and standard deviation single value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:NIOT:MEASurement<Instance>:MEValuation:PDYNamics:CURRent
value: ResultData = driver.niotMeas.multiEval.pdynamics.current.fetch()

Return the current, average, minimum, maximum and standard deviation single value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:NIOT:MEASurement<Instance>:MEValuation:PDYNamics:CURRent
value: ResultData = driver.niotMeas.multiEval.pdynamics.current.read()

Return the current, average, minimum, maximum and standard deviation single value results of the power dynamics measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.