Average

SCPI Commands :

READ:NIOT:MEASurement<Instance>:MEValuation:SEMask:AVERage
FETCh:NIOT:MEASurement<Instance>:MEValuation:SEMask:AVERage
CALCulate:NIOT:MEASurement<Instance>:MEValuation:SEMask:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits.

  • Obw: enums.ResultStatus2: Occupied bandwidth

  • Tx_Power: enums.ResultStatus2: Total TX power within 400 kHz

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits.

  • Obw: float: Occupied bandwidth

  • Tx_Power: float: Total TX power within 400 kHz

calculate() → CalculateStruct[source]
# SCPI: CALCulate:NIOT:MEASurement<Instance>:MEValuation:SEMask:AVERage
value: CalculateStruct = driver.niotMeas.multiEval.seMask.average.calculate()

Return the current, average and standard deviation single value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:NIOT:MEASurement<Instance>:MEValuation:SEMask:AVERage
value: ResultData = driver.niotMeas.multiEval.seMask.average.fetch()

Return the current, average and standard deviation single value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:NIOT:MEASurement<Instance>:MEValuation:SEMask:AVERage
value: ResultData = driver.niotMeas.multiEval.seMask.average.read()

Return the current, average and standard deviation single value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.